Coating agents list

The product is a UV-curable antifouling silicone hard coating agent. It is made from silicone resin, which repels permanent marker ink well. You can easily wipe off the ink. It also has excellent slipperiness, which makes it ideal for demolding purposes.

The product is a silicone heat-curable antifouling coating agent. It is made from silicone resin, which repels permanent marker ink well. You can easily wipe off the ink. It can be applied over flexible base materials.

The product is a heat-curable and antifouling hard silicone coating agent. It is made from silicone resin, which repels permanent marker ink. You can easily wipe it off.

The product is a fluorine-based heat-curable antifouling coating agent made from fluororesin. It is water and oil repellent and features excellent antifouling properties. It can be applied over flexible base materials.

The product is a water-based polyurethane coating agent. It has a pencil hardness of F and an elongation of 150%.

The product is a water-based polyurethane coating agent. It has a pencil hardness of B and an elongation of 400%.

The product is a water-based polyurethane coating agent. It elongates up to 230% before curing. It gains a pencil hardness of 2H after curing, and provides a hard coating.

It has material advantages of closely following the base material shape during the molding step and increasing hardness after curing.

By adding a small amount of special carbon, it improves the concealability of the inside while maintaining transparency and antiglare property.
Because of its flexibility, it can be applied to urethane-based films.Flashlights with curved surface shapes, as well as light-emitting and display devices with enhanced design and anti-glare properties, can prevent damage and deterioration of the light source cover.

Anti-fog coatings refer to coatings that make the surface hydrophilic with a low contact angle between the coating and water. TOKUSHIKI's anti-fog coatings are resinous and thermoset coatings. This coating agent has a low contact angle to water, so water spreads on the coating film without water droplets, and antifogging properties can be expected. Due to its self-healing property, it is superior in scratchability to similar acrylic paint films.

 

It is a non-hazardous material due to its water dissolving type. It is very easy to handle (transport and storage of paint, etc.) compared to solvent-based and monomer-diluent coatings. Because of its good adhesion and thin film type, it can be used with shorter drying time and ultraviolet radiation dose. Due to the high concentration type, various additional functions can be added depending on the application (functional coating agent for each application is under development)

 

Since the ratio of zirconium oxide is about 80% in terms of resin ratio, a high refractive index can be expected.
Various properties can be imparted depending on the type of filler such as resin and metal oxide to be added.
Excellent handling due to high filler concentration and low viscosity.